QUICK ANSWER
Track bent, loose, or out of line? Do not force the door. Bad tracks make a door jam, shake, or slip off. We straighten, tighten, or replace them so the door glides again.
The tracks guide every inch of the door’s trip. Even a small bend or a loose bolt can make the whole door bind.
What knocks tracks out of line
A bump from a car
A light tap from a bumper bends a track just enough to catch a roller.
Loose mounting bolts
Years of vibration back the bolts out, and the track slowly drifts away from the door.
Heavy snow and ice
Ice packed along the bottom of the track can pry it out of position when the door pushes through.
HOW NEXTDOOR FIXES IT
We check that both tracks are level, plumb, and square to each other, tighten the brackets, and straighten minor bends. A badly bent section is replaced. Then we test the door with the rollers and springs so it moves cleanly from top to bottom.
Get today’s priceRepair or replace the track?
A light bend can often be corrected on site. A crimped or twisted track should be replaced, because a weak spot will catch a roller again. For a door that has already jumped out, see our page on off-track doors, and for one bad bend read about bent track repair.
WHY YOUR NEIGHBORS CALL NEXTDOOR
Ohio’s garage door team, right next door.
Local shops in Strongsville, East Cleveland and North Ridgeville.
- Everyone calls Nextdoor first.Families across Ohio call us every day, and they pass our number to the neighbor down the street. Booking tends to fill up by midday, so call early and claim a slot.
- Here today. Fixed today.A locally owned team that shows up fast, explains the problem in plain words, and tells you what the door needs before any work starts. Same-day service is available.
- The Nextdoor standard.Licensed technicians, trucks stocked with common parts, careful work, and we run the door with you before we go. Homes and businesses get the same care.
Helpful details to share when you call
- Tell us where the door sticks or shakes.
- Mention any recent bump from a vehicle.
- Do not hammer or bend the track yourself.
Questions about track repair & alignment
Can a bent track be straightened?
Light bends can sometimes be corrected on site. A creased or twisted track is better replaced, since a weak spot can catch a roller again.
Why does my door shake in one spot?
A bend or loose bolt in the track at that spot is a common cause. We check the full length of both tracks and tighten or realign them.